-->

Windows 10 Oem Retail
Windows 10 Oem Vs Retail
Windows Oem Software
Change Windows 10 From Oem To Retail
Windows 10 Oem

Windows 10 Oem Retail

This article describes how to change the Volume Licensing product key.

Original product version: Windows Server 2012 R2, Windows 10 - all editions
Original KB number: 328874

Introduction

The retail gives you the right to actually transfer, while OEM is 50/50. My coworker got a OEM Win8 back then and when he changed his board, his key won't activate no matter what. And OEM prebuilts, the key is built into the bios so when you change your board, you loose your key.

Warning

The facts are OEM is tied onto your Motherboard and other hardware. You change/replace them, your Windows copy is deactivated. Then next time online, it will attempt to reactivate. Checking if the hardware is too different, OEM won't reactivate. Meaning you have to contact Microsoft themselves and explain the changes, with a good reason why. Which you should then be using FPP aka Retail licensing here, not OEM. OEM is for pre-installation or for System Builders to reseller the software. If you want to build a whitebox PC, with Windows 10 you need to use a full Retail license for the device if you want to run Windows 10.

The steps in the article are effective only on Volume License media. If you try these steps on OEM media or on retail media, you will not change the product key.

When you install Windows XP or Windows Server 2003, the media must match the product key. That is, the channel (MSDN, retail, OEM, Volume License, and so on), the SKU (Windows XP Professional, Windows XP Home Edition, and so on), and the language (English, French, and so on) must match between the product key and the media. It is necessary so that you can successfully enter the product key. If the installation media does not match the product key, you receive the following error message:

Product Key is invalid.

Windows 10 Oem Vs Retail

If you use a 'leaked' product key (a product key that is known to be available to the public) to deploy Windows XP across multiple computers (a Volume Licensing installation), you might be unable to install Windows XP Service Pack 1 (SP1) and later versions of Windows XP, or automatically obtain updates from the Windows Update Web site. For example, you might receive the following error message when you install Windows XP SP1 and later versions of Windows XP:

The Product Key used to install Windows is invalid. Please contact your system administrator or retailer immediately to obtain a valid Product Key. You may also contact Microsoft Corporation's Anti-Piracy Team by emailing piracy@microsoft.com if you think you have purchased pirated Microsoft software. Please be assured that any personal information you send to the Microsoft Anti-Piracy Team will be kept in strict confidence.

This article is intended for an advanced computer user. You might find it easier to follow the steps if you print this article first.

More information

Prerequisites

You must have a valid product key before you can use the information in this article. To obtain a valid product key, click the following link to contact the Microsoft Volume Licensing Service Center:
https://www.microsoft.com/licensing/servicecenter/home.aspx

Steps to change the volume licensing product key

This article describes two methods for how to change the Windows XP product key after a Volume Licensing installation to resolve the issue. One method uses the Windows Activation Wizard graphical user interface (GUI) and the other method uses a Windows Management Instrumentation (WMI) script. The Activation Wizard method is easier. However, if you must change the product key for multiple computers, the script method is more suitable.

Method 1: Use the Activation Wizard

Important

This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows
If you only have a few volume licensing product keys to change, you can use the Activation Wizard.

Windows Oem Software

Note

We recommend that you run System Restore to create a new restore point before you follow these steps.

Deactivate Windows

Click Start, and then click Run.
In the Open box, type regedit, and then click OK.
In the navigation pane, locate and then click the following registry key: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsNTCurrent VersionWPAEvents
In the topic pane, right-click OOBETimer, and then click Modify.
Change at least one digit of this value to deactivate Windows.

Reactivate Windows and add new product key

Click Start, and then click Run.
In the Open box, type the following command, and then click OK.
%systemroot%system32oobemsoobe.exe /a
Click Yes, I want to telephone a customer service representative to activate Windows, and then click Next.
Click Change Product key.
Type the new product key in the New key boxes, and then click Update.
If you are returned to the previous window, click Remind me later, and then restart the computer.
Repeat steps 1 and 2 to verify that Windows is activated. You receive the following message: Windows is already activated. Click OK to exit.
Click OK.
Install Windows XP Service Pack 1a or a later version of Windows XP.

If you cannot restart Windows after you install Windows XP SP1 or a later version of Windows XP, try the following steps:

Restart your computer and start pressing F8 until you see the Windows Advanced Options menu.
Select Last Known Good Configuration from the menu and press ENTER. This option starts Windows by using a previous good configuration.
Repeat steps 1 through 8 under 'Reactivate Windows and add new product key.'

If you can install SP1 or a later version of Windows XP and you can restart Windows, you have resolved the issue. If the issue has not been resolved, try method 2 or see the 'Next Steps' section for more troubleshooting resources.

Method 2: Use a script

If you must change the product key for multiple computers, we recommend this method. You can create a WMI script that changes the volume licensing product key, and then deploy this script in a startup script.

The sample ChangeVLKey2600.vbs script and the sample ChangeVLKeySP1 script that are described in this section use the new volume licensing key that you want to enter as a single argument. It is in a five-part alphanumeric form.

We recommend that you use the ChangeVLKey2600.vbs script on Windows XP-based computers that are not running Windows XP SP1 and later versions of Windows XP and that you use the ChangeVLKeySP1.vbs script on Windows XP-based computers that are running Windows XP SP1 and later versions of Windows XP. These scripts perform the following functions:

They remove the hyphen characters (-) from the five-part alphanumeric product key.
They create an instance of the win32_WindowsProductActivation class.
They call the SetProductKey method with the new volume licensing product key. You can create a batch file or a cmd file that uses ei

Change Windows Oem To Retail